Fish and Aquatic Life
Sand Lake, in the Holcombe Flowage Watershed, is a 271.76 acre lake that falls in Chippewa and Rusk Counties. This lake is managed for fishing and swimming and is currently not considered impaired.
Author Aquatic Biologist
Source: 1971, Surface Water Resources of Rusk County Sand Lake, T33N, R8W, Section 33
A soft water, seepage lake with an intermittent outlet to nearby Goose Lake. Northern pike, walleyes, and largemouth bass, are all abundant, and muskellunge are common. Other fish species include bluegills, perch, black crappie, rock bass, pumpkinseed, bullheads, and cisco. The shoreline is mainly upland hardwood and conifer, with scattered areas of bog. Littoral bottom types vary and include sand, gravel, rock and muck. Game includes beaver, muskrat, and nesting and migratory ducks. There are three resorts, one boat rental, and 48 cottages on the lake. Public frontage amounts to 0.05 mile of shoreline owned by the Town of Big Bend, and there is a public access on the west side of the lake.
Surface Acres = 261.9, Maximum Depth = 91 feet, M.P.A. = 20 ppm, Secchi disk = 12 feet
Author Surface Water Inventory Of Wisconsin
Sand Lake (2353600) was placed on the impaired waters list for Mercury in fish tissue in 1998. This water was assessed during the 2016 listing cycle; chlorophyll sample data were clearly below 2016 WisCALM listing thresholds for the Recreation use and Fish and Aquatic Life use. This lake is considered impaired for Fish Consumption use and meeting REC and FAL uses.
Author Aaron Larson
Sand Lake was listed on the 303(d) list in 1998 due to mercury concentrations in fish tissue from atmospheric deposition. This water was assessed for the 2012 listing cycle and the original listing due to mercury levels in fish tissue was confirmed.
Author Aaron Larson
Wisconsin has over 84,000 miles of streams, 15,000 lakes and milllions of acres of wetlands. Assessing the condition of this vast amount of water is challenging. The state's water monitoring program uses a media-based, cross-program approach to analyze water condition. An updated monitoring strategy (2015-2020) is now available. Compliance with Clean Water Act fishable, swimmable standards are located in the Executive Summary of Water Condition in 2018. See also the 'monitoring and projects' tab.
Wisconsin's Water Quality Standards provide qualitative and quantitative goals for waters that are protective of Fishable, Swimmable conditions [Learn more]. Waters that do not meet water quality standards are considered impaired and restoration actions are planned and carried out until the water is once again fishable and swimmable
Management goals can include creation or implementation of a Total Maximum Daily Load analysis, a Nine Key Element Plan, or other restoration work, education and outreach and more. If specific recommendations exist for this water, they will be displayed below online.
Monitoring the condition of a river, stream, or lake includes gathering physical, chemical, biological, and habitat data. Comprehensive studies often gather all these parameters in great detail, while lighter assessment events will involve sampling physical, chemical and biological data such as macroinvertebrates. Aquatic macroinvertebrates and fish communities integrate watershed or catchment condition, providing great insight into overall ecosystem health. Chemical and habitat parameters tell researchers more about human induced problems including contaminated runoff, point source dischargers, or habitat issues that foster or limit the potential of aquatic communities to thrive in a given area. Wisconsin's Water Monitoring Strategy was recenty updated.
Grants and Management Projects
|WBIC||Official Waterbody Name||Station ID||Station Name||Earliest Fieldwork Date||Latest Fieldwork Date||View Station||View Data|
|2353600||Sand Lake||10005376||Sand Lake||8/29/2000||9/12/2017||Map||Data|
|2353600||Sand Lake||553067||Sand Lake - Deep Hole||8/10/1986||4/29/2021||Map||Data|
|2353600||Sand Lake||10018299||Sand Lake -- Access||6/20/2011||8/31/2019||Map||Data|
|2353600||Sand Lake||553183||Sand Lake - Sand Lake (3308w33)||Map||Data|
Sand Lake is located in the Holcombe Flowage watershed which is 170.38 mi². Land use in the watershed is primarily forest (53.90%), wetland (23.30%) and a mix of open (9.10%) and other uses (13.70%). This watershed has 216.07 stream miles, 6,687.77 lake acres and 19,889.41 wetland acres.
Nonpoint Source Characteristics
This watershed is ranked Not Ranked for runoff impacts on streams, Medium for runoff impacts on lakes and Low for runoff impacts on groundwater and therefore has an overall rank of Low. This value can be used in ranking the watershed or individual waterbodies for grant funding under state and county programs.This water is ranked High Lake for individual Lakes based on runoff problems and the likelihood of success from project implementation.