Skip to main content

Air Monitoring Map for Industrial Sand Mine/Processing Plants

Industrial sand operations that have a requirement in their permit to monitor for particulate matter must provide ambient monitoring data to the DNR. The DNR Air Management Program works with industrial sand facilities to provide technical assistance and review of any required monitor sites near the facilities.

Particulate data from industrial sand mines is monitored using U.S. EPA-approved filter-based methods. The filters are prepared in a laboratory and installed in the field to collect samples. Filters are then collected from the field sites and returned to the laboratory for analysis. The analyzed data is submitted monthly to the DNR and quality assured by DNR air monitoring staff. The quality assured data is compiled into plots and posted to the interactive map below and entered into an Excel spreadsheet approximately 60-90 days after the end of each calendar quarter.

Quality assured data through September 2023

Download air monitoring data [XLSX]

Updated data posted on 12/18/23.

Interactive Map

To view information on a site, use the Air Management Data Viewer (AMDV). Directions on how to use the data viewer can be found on DNR’s Air Management Data viewer webpage.