LRP - Licenses

LRP - Regulations

LRP - Permits

Recreation - Statewide

Recreation - Trapping

Recreation - Fishing

Recreation - Hunting

Env. Protection - Management

Env. Protection - Emergency

Env. Protection - Resources

To sign up for updates or to access your subscriber preferences, please enter your contact information below.



 
Discover
how Wisconsin protects waterways by holding them in trust for everyone to enjoy.
Find
the permits you need for your waterfront property projects.
Learn
about the permit process that protects public waters.

Waterway protection Weed rake

Weed Rake

Weed rake

Many aquatic plant management and nuisance control activities require a permit issued by the Department. Please contact your local aquatic plant management coordinator before engaging in any aquatic plant management or nuisance control activities. Permits are needed for aquatic plant control when Chemicals are used, Biological controls are used, Physical techniques are used, or if Wild rice is involved. Visit Aquatic Plants for more information. Mechanical devices or plant barriers placed in public water on lake or stream bed or that impacts lake or stream bed may require a permit.

Determine permit required

This is a text link version of our weed rake interactive question and answer module. If you are seeing this message, you currently have JavaScript disabled or are in compatibility mode while using Internet Explorer. This text version is here to help you understand if you need a permit from the Wisconsin Department of Natural Resources for your weed rake project, and if so, which one. Please go through and answer each question. This will help you determine which permit you will need.

Question 1 :

What do you want to do:

If your answer is "Place a device ATTATCHED OR TETHERED TO AN EXISTING STRUCTURE LIKE A PIER OR PILING that is designed to mechanically remove aquatic plants,” go to Question 2.

If your answer is "Place a device THAT IS FREE FLOATING OR ANCHORED TO THE BOTTOM OF A LAKE OR STREAM that is designed to mechanically remove aquatic plants,” :

You've answered Place a device THAT IS FREE FLOATING OR ANCHORED TO THE BOTTOM OF A LAKE OR STREAM that is designed to mechanically remove aquatic plants:

Since you want to utilize a device that is NOT attached to an existing structure, but rather either free floating or tethered to shore or a device directly anchored to lakebed or streambed, an individual permit is required. Please apply for a Miscellaneous Structure individual permit, please visit the individual permits page.*Please note: WAMS ID and password needed to apply. If you do not have a WAMS ID, you must register for one prior to proceeding.

The department has developed a permit checklist [PDF] describing the information necessary to submit a complete application. Please review this checklist prior to applying to ensure you have all of the necessary information.

You've answered I don't know.

If your answer is “I don't know,”:

Drawing 1 depicts a device that is attached to an existing structure. If your device looks like this, go back and choose "attached to existing structure".
Weed rake diagram

Drawing 2 depicts a device that is free floating or anchored to the bottom. If your device looks like this, go back and choose "free floating".
Weed rake diagram

Question 2 :

How does your device mechanically remove aquatic plants? Does it:

If your answer is "Have a FLOATING boom that removes plants by the movement of rake tines WITHOUT grubbing, lifting or rolling of the bottom sediments,” go to Question 3.

If your answer is "Place a device THAT IS FREE FLOATING OR ANCHORED TO THE BOTTOM OF A LAKE OR STREAM that is designed to mechanically remove aquatic plants,” :

You've answered Place a device THAT IS FREE FLOATING OR ANCHORED TO THE BOTTOM OF A LAKE OR STREAM that is designed to mechanically remove aquatic plants:

Please apply for a Miscellaneous Structure individual permit, please visit the individual permits page.*Please note: WAMS ID and password needed to apply. If you do not have a WAMS ID, you must register for one prior to proceeding.

The department has developed a permit checklist [PDF] describing the information necessary to submit a complete application. Please review this checklist prior to applying to ensure you have all of the necessary information.

You've answered I don’t know how my device removes plants. .

If your answer is “I don’t know how my device removes plants. ,”:

Drawing 1 depicts a device that has a non-floating boom and rolls along the bottom to control plants. If this most closely resembles how your device operates, please go back and choose "non-floating boom".
Weed rake diagram

Drawing 2 depicts a device that has a floating boom and uses hanging tines to remove vegetation without rolling bottom sediments. If this most closely resembles how your device operates, go back and choose "floating boom".
Weed rake diagram

Question 3 :

Based on the answers to your previous questions, it appears that your device can be considered a weed rake*. Will your device be placed in a waterbody designated as an area of special natural resource interest (ASNRI), OR within a public rights feature (PRF) as described in s. NR 1.06, OR located within a floating bog?

*A weed rake is a device that attaches to an existing structure such as a pier or piling, designed to mechanically remove aquatic plants by the movement of rake tines attached to a floating boom without grubbing, lifting or rolling of the bottom sediments.

You've answered Yes.

If your answer is “Yes,”:

Please apply for a Miscellaneous Structure individual permit, please visit the individual permits page.*Please note: WAMS ID and password needed to apply. If you do not have a WAMS ID, you must register for one prior to proceeding.

The department has developed a permit checklist [PDF] describing the information necessary to submit a complete application. Please review this checklist prior to applying to ensure you have all of the necessary information.

You've answered No.

If your answer is “No,”:

Based on your answer, you may be eligible for Weed Rake General Permit.

Please apply for a Weed Rake General permit. *Please note: WAMS ID and password needed to apply. If you do not have a WAMS ID, you must register for one prior to proceeding.

Please also be aware there are additional General Permit standards:

  • boom radius may not exceed 24 feet in length and may not disturb bottom sediments in water depths greater than 3 feet.
  • the weed rake may not be operated unattended for more than 5 days of continuous operation.
  • vegetation that has been cut or dislodged must be removed from the waterway.
  • operation may not result in the disturbance or removal of more than 1,200 square feet of vegetation.

The department has developed a weed rake general permit checklist [PDF] describing the information necessary to submit a complete application for a boathouse certification. Please review this checklist prior to applying to ensure you have all of the necessary information.

As always, before starting any project, please make sure that there are no federal or local regulations for construction of a boathouse in your location.

You've answered I don't know.

If your answer is “I don't know,”:

Please use our Surface Water Data Viewer - Designated Waters to find your location and to determine what the water body designation is for the water body where your project is located. Once you know this information you may return to Question 3 and answer Yes or NO. (If you are unsure about using the Designated Waters Search tool visit our tutorial to learn how.)

Exemptions

  • There are no exemptions for weed rake.

Laws

Applicable statutes and codes include Section 30.12, Wis. Stats. [PDF exit DNR] and NR 328-Subchapter III, Wis. Adm. Code [PDF exit DNR].

Local permits and U.S. Army Corps of Engineers regulations may also apply. We advise you to contact your local zoning office and your regional U.S. Army Corps of Engineers office [exit DNR].

Last revised: Wednesday November 05 2014