LRP - Licenses

LRP - Regulations

LRP - Permits

Recreation - Statewide

Recreation - Trapping

Recreation - Fishing

Recreation - Hunting

Env. Protection - Management

Env. Protection - Emergency

Env. Protection - Resources

To sign up for updates or to access your subscriber preferences, please enter your contact information below.



 
Check
to see if your business is eligible for confidential, non-regulatory assistance.
Explore
all DNR permits to see which may be required.
Find
resources to help you comply.
Contact information
For information about the Small Business Environmental Assistance Program, contact:
Small Business Hotline
Toll free: 855-889-3021
DNRSmallBusiness@wisconsin.gov

Metal finishing

Metal finishing operations comprise many types of operations and have a range of environmental regulations to meet. This section provides information on how to comply with some of those environmental regulations.

Air pollution regulations

Nine metal fabrication and finishing source categories

The USEPA regulates nine metal fabrication and finishing source categories where they use materials that contain at least 0.1 percent by weight (of the metal) of cadmium (Cd), chromium (Cr), lead (Pb), or nickel (Ni), and materials that contain at least 1.0 percent by weight (of the metal) manganese (Mn), as shown in formulation data provided by the manufacturer or supplier:

  1. Electrical and Electronic Equipment Finishing Operations, including motor and generator manufacture; and electrical machinery, equipment, and supplies not elsewhere classified (NEC);
  2. Fabricated Metal Products NEC;
  3. Fabricated Plate Work (Boiler Shops);
  4. Fabricated Structural Metal Manufacturing;
  5. Heating Equipment, except Electric;
  6. Industrial Machinery and Equipment Finishing Operations, including construction machinery manufacturing; oil and gas field machinery manufacturing; and pumps and pumping equipment manufacturing);
  7. Iron and Steel Forging;
  8. Primary Metal Products Manufacturing; and
  9. Valves and Pipe Fittings NEC.

Within these categories five industrial processes are regulated: Dry Abrasive Blasting; Dry Grinding and Dry Polishing with Machines; Dry Machining; Spray Painting; and Welding. For more details on the rule requirements, review the documents provided here.

Plating and polishing operations

The USEPA regulates plating and polishing operations, where the operations use or emit the metal hazardous air pollutants (HAPs) from materials that contain at least 0.1% in weight of Cd, Cr, Pb, or Ni, and at least 1.0% of Mn:

  • Electroplating (other than chromium electroplating);
  • Electroless or non-electrolytic plating;
  • Other non-electrolytic metal coating (such as chromate conversion coating, nickel acetate sealing, sodium dichromate sealing and manganese phosphate coating);
  • Thermal spraying;
  • Dry mechanical polishing;
  • Electroforming; and
  • Electropolishing.

For more details on the rule requirements, review these materials and visit [national web page link.]

Waste regulations

Unused materials from metal fabrication, metal finishing, or plating and polishing operations may be considered hazardous waste. Before disposing of any unused materials from processing, it is important to review whether the material is hazardous and then properly manage the waste going forward. Start with the SBEAP's hazardous waste page and learn more about hazardous waste management.

Wastewater regulations

  • Small industrial sources should check with their local Wastewater Treatment plant or sewerage district about disposal of any industrial waste liquids. They will have limits on what contaminants can be sent to the sewer. You may need to pretreat your wastewater discharge before sending it to the treatment plant. Review the requirements starting on the DNR's wastewater page.
  • Small industrial sources may also have to comply with a storm water discharge permit, or certify that they are not a source of exposure to storm water contamination. Review the storm water runoff permits page for more details.
Last revised: Monday April 03 2017